08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Distillation, Synthesis
- Components for Extraction
- Components for Reaction and Distillation
- Distillation - Accessories
- Dropping Funnel
- Flasks with NS Joint Neck
- Flat Ground Flange Reaction Vessel
- Gas Wash Bottle
- Ground Joint, Attachable
- KPG Stirrer and Bearing
- Laboratory Reactor
- NS Joint Accessories
- Reflux Condenser
- Accessories for Keck adapter KA 14
- Air condensers without jacket, DURAN® tubing
- Coil condensers, DURAN® tubing, with glass olives
- Coil condensers, DURAN® tubing, with plastic olives
- Condensers acc. to Allihn with GL threads, DURAN® tubing
- Condensers acc. to Allihn, DURAN® tubing
- Condensers acc. to Davies, DURAN® tubing
- Condensers acc. to Davies, DURAN® tubing, with plastic olives
- Condensers acc. to Dimroth, with GL threads, DURAN® tubing
- Condensers acc. to Liebig, DURAN® tubing, with glass olives
- Condensers acc. to Liebig, DURAN® tubing, with plastic olives
- Condensers, ground glass joint, Allihn
- Condensers, ground glass joint, Allihn, borosilicate glass 3.3
- Condensers, ground glass joint, Dimroth, borosilicate glass 3.3.
- Condensers, ground glass joint, Liebig, borosilicate glass 3.3, with glass olives
- Condensers, ground glass joint, Liebig, borosilicate glass 3.3, with PP olives
- Cones with drip tip, DURAN® tubing
- Dimroth condensers for extractors, with glass olives, DURAN® tubing
- Dimroth condensers, DURAN® tubing
- LLG-Condenser acc. to Allihn, borosilicate glass 3.3, glass olive
- LLG-Condenser acc. to Allihn, borosilicate glass 3.3, PP olive
- LLG-Condenser acc. to Dimroth, borosilicate glass 3.3, glass olive
- LLG-Condenser acc. to Dimroth, borosilicate glass 3.3, PP olive
- LLG-Condenser acc. to Liebig, borosilicate glass 3.3, glass olive
- LLG-Condenser acc. to Liebig, borosilicate glass 3.3, PP olive
- Long ground cones, DURAN® tubing
- Long ground sockets, DURAN® tubing
- Needle-valve stopcocks, right-angled, DURAN® tubing
- Spiral condensers, borosilicate glass 3.3, with glass olive
- Spiral condensers, borosilicate glass 3.3, with PP olive
- Spiral condensers, DURAN® tubing, with glass olives
- Spiral condensers, DURAN® tubing, with PP olives
- Standard Ground Stopper
- Stopcock and Valve
- Tubing Adapter
- Filtration
- Rotary Evaporator
- Separating, Centrifuging
- Distillation, Synthesis
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Spiral condensers, borosilicate glass 3.3, with PP olive
Made of borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12592. The Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9 mm bore size.
Spiral condensers, borosilicate glass 3.3, with PP olive
PART NO.4AJ-4008414
81142||79502||79929||81378||81790||81934||79404||81861||81120||79136||79397||81535||81052||81657
Length jacket mm||Max. feed particle size width mm||Camber||Ground size||Cooling surface||Connection||IP code||Connection size||Standard||Min. measurement||Cap size||Material||Type of construction||PK
400||NS29/32|| ||PP olive|| || ||DIN 12592||Boro 3.3||Spiral condenser||1
ISOLAB
033.16.403
Cooler Snake shape
Snake cooler
0
2
1
1
Price: £51.87
Out of Stock
PART NO.4AJ-6257820
81142||79502||79929||81378||81790||81934||79404||81861||81120||79136||79397||81535||81052||81657
Length jacket mm||Max. feed particle size width mm||Camber||Ground size||Cooling surface||Connection||IP code||Connection size||Standard||Min. measurement||Cap size||Material||Type of construction||PK
||250||NS29/32|| || || || || || ||DIN 12592||Boro 3.3|| ||Spiral condenser||1
ISOLAB
033.16.253
Cooler Snake shape
Snake cooler
0
2
0
1
Price: £37.47
Out of Stock
Accessories:
- Sleeves, cone joint, PTFE
- Sleeves with ribs, PTFE
- Joint clips for conical joint sleeve connections, stainless steel, with set screw
- Ground joint clips for sleeve connections, wire, Chrome-nickel steel
- Joint clips KECK, POM, for conical ground joints
- Joint clips KECK, POM, for spherical ground joints
- Gas leak detection fluid, bottle
- Joint grease, K.W.S
- Engler distilling flasks, DURAN®, ASTM, with beaded rim
- BUDDE - joint grease
- PTFE sealing rings for jointed glassware