08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Access port with silicone plug for CO2 incubators CB series
- Accessories for CO2 incubators Heracell™ VIOS
- Accessories for CO2 Incubators ICOmed
- Accessories for CO2 Incubators INCOmed
- Accessories for Midi 40 CO2Incubator
- Alternative O2 control range for CO2 incubators CB / CBF
- Base frames for CO2 incubators CB series
- Cell Culture Flasks TripleFlask™, non-treated, PS/HDPE, pyrogen-free
- Cell Locker™ chambers for CO2 inkubator Heracell™ VIOS™ 160i
- CO2 incubator ICO
- CO2 Incubator Midi 40 with small volume
- CO2 incubator, BBD 6220
- CO2 incubator, BBD 6220
- CO2 incubators CB
- CO2 incubators CB-O, with O2 control
- CO2 incubators CB-S
- CO2 incubators CBF-O, with humidity and O2 control
- CO2 incubators CBF-OZ, with cell therapy compartmentalization, humidity and O2 control
- CO2 incubators CBF, with humidity control
- CO2 Incubators CelCulture® with copper interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization and ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, ULPA filter and O2 control
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter
- CO2 Incubators CelCulture® with high heat sterilization, without ULPA filter, with O2 control
- CO2 Incubators CelCulture® with stainless steel interior/air jacket and ULPA filter
- CO2 Incubators CelCulture® with stainless steel interior/air jacket, without ULPA filter
- CO2 incubators Heracell™ VIOS 160i, dual chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, dual chamber, TC-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, IR-CO2 sensor
- CO2 incubators Heracell™ VIOS 160i, single chamber, TC-CO2 sensor
- CO2 Incubators ICOmed
- CO2 Incubators with Chambers Heracell™ 150i/240i
- Copper interior for CO2 incubator CB-S 170
- Divided inner doors for CO2 incubators CB / CBF
- Door hinge on the left for CO2 incubators CB series
- Options for CO2 incubator Heracell™ VIOS
- Quick sample access for CO2 incubators CB / CBF
- Shelves for CO2 incubators CB
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- CO2-Incubator
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
CO2 incubators CB-O, with O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.
- Anti-contamination concept with 180 °C hot air sterilization
- CO2 sensor with single-beam infrared technology
- Seamless inner chamber made of stainless steel
- Fanless interior with Venturi CO2 gas mixing nozzle
- Internal data logger, measured values can be read out via USB
- Troubleshooting system with visual and acoustic alarms
- Interfaces: Ethernet, USB, zero-voltage alarm contact
-Humidification system with condensation protection
- Touchscreen controller
- Fail-safe CO2 system for protecting the pH of cell cultures
CO2 incubators CB-O, with O2 control
PART NO.4AJ-4705097
82166||79566||81191||81398||81646||79168||79442||81289||81473||81258||81092||81077||81397||81459||79085||78965||81071||79026||81480||82272||79666||81931||81817||79104||79898||81954||79560||79207||81152||79902||81657
Max. inlet pressure||Heating capacity kW||Length mm||Temperature||Temperature stability||Max. suction capacity l/min||Max. delivery pressure bar||Chemical resistant||Temperature stability K||Cooling capacity at 20 °C W||For Crucibles||Max. load g||Reproducibility g||Hot air sterilisation up to||With timer||Max. no. of inserts||Salinity||Max. interpupillary distance mm||Width stage mm||Min. voltage V||For bottles||Package capacity pcs||Nominal capacity µl||Length needle mm||Depth mm||Membrane surface cm²||Throughput||Flash point||Stem Ø||Min. pressure||PK
CB170-O-UL||170||+6||RT+6 ... 60 °C||±0,1 K (37 °C)|| ||20.0||0 ... 20 %||0.2||20||0.2 ... 20 %||90||95||90 ... 95 %|| ||6|| ||680||715||870||680 x 715 x 870 mm||560||500||600||95||1.40||US||Mains connection|| || ||1
BINDER
9640-0012
CB170UL
Incubator(s) CO2
0
0
1
1
Out of Stock
PART NO.4AJ-4684688
82166||79566||81191||81398||81646||79168||79442||81289||81473||81258||81092||81077||81397||81459||79085||78965||81071||79026||81480||82272||79666||81931||81817||79104||79898||81954||79560||79207||81152||79902||81657
Max. inlet pressure||Heating capacity kW||Length mm||Temperature||Temperature stability||Max. suction capacity l/min||Max. delivery pressure bar||Chemical resistant||Temperature stability K||Cooling capacity at 20 °C W||For Crucibles||Max. load g||Reproducibility g||Hot air sterilisation up to||With timer||Max. no. of inserts||Salinity||Max. interpupillary distance mm||Width stage mm||Min. voltage V||For bottles||Package capacity pcs||Nominal capacity µl||Length needle mm||Depth mm||Membrane surface cm²||Throughput||Flash point||Stem Ø||Min. pressure||PK
CB260-O||267||+6||RT+6 ... 60 °C||±0,1 K (37 °C)|| ||20.0||0 ... 20 %||0.2||20||0.2 ... 20 %||90||95||90 ... 95 %|| ||8|| ||740||785||1020||740 x 785 x 1,020 mm||620||575||750||125||1.50||EU||Mains connection|| || ||1
BINDER
9640-0014
CB260
Incubator(s) CO2
0
0
2
1
Out of Stock
PART NO.4AJ-4684686
82166||79566||81191||81398||81646||79168||79442||81289||81473||81258||81092||81077||81397||81459||79085||78965||81071||79026||81480||82272||79666||81931||81817||79104||79898||81954||79560||79207||81152||79902||81657
Max. inlet pressure||Heating capacity kW||Length mm||Temperature||Temperature stability||Max. suction capacity l/min||Max. delivery pressure bar||Chemical resistant||Temperature stability K||Cooling capacity at 20 °C W||For Crucibles||Max. load g||Reproducibility g||Hot air sterilisation up to||With timer||Max. no. of inserts||Salinity||Max. interpupillary distance mm||Width stage mm||Min. voltage V||For bottles||Package capacity pcs||Nominal capacity µl||Length needle mm||Depth mm||Membrane surface cm²||Throughput||Flash point||Stem Ø||Min. pressure||PK
CB170-O||170||+6||RT+6 ... 60 °C||±0,1 K (37 °C)|| ||20.0||0 ... 20 %||0.2||20||0.2 ... 20 %||90||95||90 ... 95 %|| ||6|| ||680||715||870||680 x 715 x 870 mm||560||500||600||95||1.40||EU||Mains connection|| || ||1
BINDER
9640-0010
CB170
Incubator(s) CO2
0
0
0
1
Out of Stock
PART NO.4AJ-4705099
82166||79566||81191||81398||81646||79168||79442||81289||81473||81258||81092||81077||81397||81459||79085||78965||81071||79026||81480||82272||79666||81931||81817||79104||79898||81954||79560||79207||81152||79902||81657
Max. inlet pressure||Heating capacity kW||Length mm||Temperature||Temperature stability||Max. suction capacity l/min||Max. delivery pressure bar||Chemical resistant||Temperature stability K||Cooling capacity at 20 °C W||For Crucibles||Max. load g||Reproducibility g||Hot air sterilisation up to||With timer||Max. no. of inserts||Salinity||Max. interpupillary distance mm||Width stage mm||Min. voltage V||For bottles||Package capacity pcs||Nominal capacity µl||Length needle mm||Depth mm||Membrane surface cm²||Throughput||Flash point||Stem Ø||Min. pressure||PK
CB260-O-UL||267||+6||RT+6 ... 60 °C||±0,1 K (37 °C)|| ||20.0||0 ... 20 %||0.2||20||0.2 ... 20 %||90||95||90 ... 95 %|| ||8|| ||740||785||1020||740 x 785 x 1,020 mm||620||575||750||125||1.50||US||Mains connection|| || ||1
BINDER
9640-0016
CB260UL
Incubator(s) CO2
0
0
3
1
Out of Stock
Accessories:
- Shelves for CO2 incubators CB
- Stacking adapters for CO2 incubators CB series
- Stacking frames for CO2 incubators CB series
- Base frames for CO2 incubators CB series
- Divided inner doors for CO2 incubators CB / CBF
- Quick sample access for CO2 incubators CB / CBF
- Door hinge on the left for CO2 incubators CB series
- Alternative O2 control range for CO2 incubators CB / CBF
- Access port with silicone plug for CO2 incubators CB series