08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Accessories for Universal drying ovens LLG-uniOVEN 42/110
- Accessories for Universal ovens B-, E- and P- series
- Drying and heating chambers ED Avantgarde.Line
- Drying and heating chambers ED Classic.Line
- Drying and heating chambers ED-S Solid.Line
- Drying and heating chambers FD Avantgarde.Line
- Drying and heating chambers FD Classic.Line
- Drying and heating chambers FD-S Solid.Line
- Drying and heating chambers FED Avantgarde.Line
- Drying and heating chambers FED Classic.Line
- Drying cabinet OVEN 125 basic dry
- Drying cabinet OVEN 125 basic dry, with glass door
- Drying cabinet OVEN 125 control dry
- Drying cabinet OVEN 125 control dry, with glass door
- Drying oven E28 series
- Glass door for Universal ovens
- Grid shelves for incubators BD-S and drying and heating chambers ED-S / FD-S
- Heavy load rack for BINDER chambers and incubators, stainless steel
- High-temperature Tube Furnaces RHTH/RHTV series
- Ovens Heratherm™ Advanced Protocol, with gravity convection
- Ovens Heratherm™ Advanced Protocol, with mechanical convection
- Ovens Heratherm™ Advanced Protocol, with mechanical convection, stainless steel exterior
- Ovens Heratherm™ General Protocol, with gravity convection
- Ovens Heratherm™ General Protocol, with mechanical convection
- Ovens TR 60 - TR 1050 up to 300 °C
- Racks for BINDER chambers and incubators, chrome-plated
- Racks for BINDER chambers and incubators, stainless steel
- Shelves
- Shelves for BINDER chambers and incubators, stainless steel
- Special equipment for Memmert Universal, Heating and Drying ovens
- Stacking kits for Ovens and Incubators Heratherm™
- Steriliser SFplus
- Support stand for Ovens and Incubators Heratherm™
- Universal drying oven LLG-uniOVEN 42 and LLG-uniOVEN 110
- Universal ovens UF
- Universal ovens UFplus
- Universal ovens UN
- Universal ovens UNplus
- USB Handheld microscope Dino-lite EdgePLUS AM8517MZT
- Viton sealings for Ovens and Incubators Heratherm™
- Wire mesh shelves for Ovens and Incubators Heratherm™
- Wire mesh shelves for Ovens Heratherm™
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Drying and heating chambers FD Avantgarde.Line
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.
- High temperature accuracy thanks to APT.line™ technology
- Electromechanical control of the exhaust air flap
- Chambers up to 115 l are stackable
- Ergonomic handle design
- USB connection for data recording
- Class 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarm
-With forced convection
- Controller with LCD display
Drying and heating chambers FD Avantgarde.Line
PART NO.6-9010-0305
81119||79101||81398||81646||81324||79085||78965||81117||79286||81597||79370||78988||79162||81339||81893||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Temperature||Temperature stability||Ultimate vacuum||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. height mm||Ext. dim. (WxDxH)||Int. width mm||Height int. mm||Int. Dim. (WxDxH)||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
FD 115||116||RT+10 ... 300 °C||±0,3 K (150 °C)|| ||Yes||5|| ||Stainless steel||710||735||710 x 605 x 735 mm||550||550||550 x 385 x 550 mm||54||EU||Mains connection||230 V, 50/60 Hz||IP 20|| ||1
Binder
9010-0305
Ovens with gravity convection
Ovens with forced convection
Drying ovens
0
2
2
1
Out of Stock
PART NO.6-9010-0303
81119||79101||81398||81646||81324||79085||78965||81117||79286||81597||79370||78988||79162||81339||81893||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Temperature||Temperature stability||Ultimate vacuum||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. height mm||Ext. dim. (WxDxH)||Int. width mm||Height int. mm||Int. Dim. (WxDxH)||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
|| || || || ||Yes||4|| || || ||560|| ||625||400|| ||41|| || || || || ||1
Binder
9010-0303
Ovens with gravity convection
Ovens with forced convection
Drying ovens
0
1
0
1
Out of Stock
PART NO.4AJ-6291250
81119||79101||81398||81646||81324||79085||78965||81117||79286||81597||79370||78988||79162||81339||81893||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Temperature||Temperature stability||Ultimate vacuum||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. height mm||Ext. dim. (WxDxH)||Int. width mm||Height int. mm||Int. Dim. (WxDxH)||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
|| || || || ||Yes||16|| || || ||1165|| ||1590||1000|| ||166|| || || || || ||1
BINDER
9010-0311
FD720
Ovens with gravity convection
Ovens with forced convection
Drying ovens
0
0
6
1
Out of Stock
PART NO.4AJ-6280362
81119||79101||81398||81646||81324||79085||78965||81117||79286||81597||79370||78988||79162||81339||81893||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Temperature||Temperature stability||Ultimate vacuum||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. height mm||Ext. dim. (WxDxH)||Int. width mm||Height int. mm||Int. Dim. (WxDxH)||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
|| || || || ||Yes||8|| || || ||810|| ||940||650|| ||85|| || || || || ||1
9010-0309
Ovens with gravity convection
Ovens with forced convection
Drying ovens
0
2
4
1
Out of Stock
PART NO.4AJ-6280294
81119||79101||81398||81646||81324||79085||78965||81117||79286||81597||79370||78988||79162||81339||81893||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Temperature||Temperature stability||Ultimate vacuum||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. height mm||Ext. dim. (WxDxH)||Int. width mm||Height int. mm||Int. Dim. (WxDxH)||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
|| || || || ||Yes||8|| || || ||810|| ||940||650|| ||85|| || || || || ||1
BINDER
9010-0310
FD260
Ovens with gravity convection
Ovens with forced convection
Drying ovens
0
0
5
1
Out of Stock
PART NO.6-9010-0309
81119||79101||81398||81646||81324||79085||78965||81117||79286||81597||79370||78988||79162||81339||81893||81974||79719||79640||79556||79404||79925||81657
Type||Nominal capacity l||Temperature||Temperature stability||Ultimate vacuum||With timer||Max. no. of inserts||Material inserts||Material interior||Ext. width mm||Ext. height mm||Ext. dim. (WxDxH)||Int. width mm||Height int. mm||Int. Dim. (WxDxH)||Weight kg||Plug type||Type of auxiliary energy||Power supply||IP code||Warranty||PK
|| || || || ||Yes||8|| ||Stainless steel|| ||810|| ||940||650|| ||85|| || || || || ||1
Binder
9010-0309
Ovens with gravity convection
Ovens with forced convection
Drying ovens
0
0
4
1
Out of Stock