08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Analytical Systems for Environmental and Food Analysis
- Sample Analysis
- BOD
- COD
- Elemental Analysis
- Extraction
- Kjeldahl
- Milk Analysis
- Oil Testing
- Photometer
- Accessories Data and electronics for Photometer PrimeLab 2.0
- Accessories for Lovibond® photometers
- Accessories for photometer photoFlex® series and turbidimeter Turb® 430 series
- Accessories for Photometer PrimeLab 2.0
- Accessories for Photometers PrimeLab 1.0
- Accessories for spectrophotometer photoLab® 7100 VIS/7600 UV-VIS
- Accessories NANOCOLOR®
- Accessories NANOCOLOR®, Membrane Filtration
- Accessories NANOCOLOR®, Standard Rectangular Cuvettes
- Cells for Photometer photoLab®
- Conductivity cell probes for purified and ultra-pure water, for PrimeLab 2.0
- Conductivity cell probes for purified and ultra-pure water, starter kit, for PrimeLab 2.0
- Conductivity cell probes, for PrimeLab 2.0
- Conductivity cell probes, starter kit, for PrimeLab 2.0
- Cuvettes for Photometer PrimeLab 2.0
- Cuvettes for photometers
- Digestion Reagents for Photometer photoLab® and pHotoFlex®
- Disposable syringes for Photometer PrimeLab 2.0
- Handheld photometer pHotoFlex® pH
- Handheld photometer pHotoFlex® pH Field case set
- Handheld photometer pHotoFlex® STD
- Handheld photometer pHotoFlex® STD Field case set
- Handheld photometer pHotoFlex® Turb Field case set
- Handheld photometers pHotoFlex® series, with / without pH and turbidity measurement
- LabStation
- LLG Photometers PrimeLab 1.0
- ORP electrodes for PrimeLab 2.0
- ORP electrodes, starter kit, for PrimeLab 2.0
- pH electrodes for PrimeLab 2.0
- pH electrodes for PrimeLab 2.0, refillable
- pH electrodes, starter kit, for PrimeLab 2.0
- pH electrodes, starter kit, for PrimeLab 2.0, refillable
- Photometer MD 110 Cooling Water
- Photometer MD150 CL-Br-ClO2-O3-pH, with tablet reagents
- Photometer MD150 Cl-Br-pH-CyA-TA-Ca, with tablet reagents
- Photometer MD150 Cl-Cl-HR (KI)-ClO2, with tablet reagents
- Photometer MD150 Cl-ClO2-pH-KS4.3, with tablet reagents
- Photometer MD150 Cl-CyA-pH, with tablet reagents
- Photometer MD150 Cl-pH, with liquid reagents
- Photometer MD150 Cl-pH, with powder and tablet reagents
- Photometer MD150 Cl-pH, with tablet reagents
- Photometer MD50
- Photometer MD50 COD
- Photometer MD50 Hazen
- Photometer MD50 Suspended solids
- Photometer NANOCOLOR® VIS II / NANOCOLOR® UV/VIS II
- Photometer photoLab® and photoFlex®, stored test programs
- Photometer photoLab® and photoFlex®, stored test protocols
- Photometer PrimeLab 2.0 SOLO
- Photometer PrimeLab 2.0 starter-kit
- Photometer PrimeLab 2.0 starter-kit, all parameters activated
- Photometer PrimeLab 2.0 starter-kit, all parameters activated, except turbidity (NTU)/PTSA/fluorescein
- Photometer PrimeLab 2.0 starter-kit, with turbidity (NTU)
- Photometer system MD 600 / MD 610
- Photometer system MultiDirect
- Portable UV254 Analyser
- Reagent powder for Comparators and Photometers Lovibond®
- Reagent sets drops
- Reagent sets powder
- Reagent sets tablets
- Reagent solutions for photometers Lovibond®
- Reagent tablets for Photometer Lovibond®
- Reagent Tablets for Photometers and Comparators Lovibond®
- Reagents for Photometer MD 100 Boiler Water/Cooling Water
- Reagents VARIO for Photometer Lovibond®and HACH®
- Reagents VISOCOLOR Powder Pillows Phosphate
- Reference standard kit pH for photometers MD series
- Reference standard kits Chloride for photometers MD series
- Reference standards for Photometer PrimeLab 2.0
- Round cells, empty
- Tube tests NANOCOLOR® Copper
- UV Spectral Sensor
- UV254 Absorption Photometer
- Special Distillation
- Turbidity
- Sample Preparation
- Sample Transport and Storage
- Texture
- Trace Analysis
- Water Purification
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
pH electrodes, starter kit, for PrimeLab 2.0
For pH measurements of water solutions in research, environmental monitoring and quality control.
- With integrated temperature sensor
- Not refillable
- Automatic recognition of connected electrodes
- Synchronisation via LabCOM®, LabCOM® Cloud (optional and free of charge)
- ProbeBOX 1.0 to connect the electrodes to the PrimeLab 2.0
Scope of supply:
pH electrode, 3 x 20 ml buffer solution (pH 4.00 / 7.00 / 10.00), 10 ml KCI solution, USB type-C cable, ProbeBOX 1.0, carrying case, user manual
pH electrodes, starter kit, for PrimeLab 2.0
PART NO.4AJ-4686961
78953||81611||81162||81588||81681||79055||81696||79971||81182||81987||81111||81013||79137||82097||81657
Clothing size||Thickness||Side necks oblique||Max. voltage V||Min. temperature °C||No. of s tirring blades||No. of inserts||Energy efficiency class||Stand height||Ex protected||Shaft Ø||Shaft length||Cable length||Measuring method||PK
||14||0 ... 14||0||80||0 ... 80 °C|| || || || || || || ||Glass||1
Water-i.d.
PL2SP-ELPHGLATC-
pH electrodes
Electrodes pH
0
3
1
1
Price: £430.27
Out of Stock
PART NO.4AJ-4686963
78953||81611||81162||81588||81681||79055||81696||79971||81182||81987||81111||81013||79137||82097||81657
Clothing size||Thickness||Side necks oblique||Max. voltage V||Min. temperature °C||No. of s tirring blades||No. of inserts||Energy efficiency class||Stand height||Ex protected||Shaft Ø||Shaft length||Cable length||Measuring method||PK
||14||0 ... 14||0||80||0 ... 80 °C|| || || || || || || ||Plastic||1
Water-i.d.
PL2SP-ELPHPCATC-
pH electrodes
Electrodes pH
0
3
0
1
Price: £415.32
Out of Stock
Suitable for:
- Photometer PrimeLab 2.0 starter-kit, all parameters activated
- Photometer PrimeLab 2.0 SOLO
- Photometer PrimeLab 2.0 starter-kit
- Photometer PrimeLab 2.0 starter-kit, with turbidity (NTU)
- Photometer PrimeLab 2.0 starter-kit, all parameters activated, except turbidity (NTU)/PTSA/fluorescein