08452 30 40 30
- Chromatography
- Environmental
- Laboratory
- Analytical Measurement and Testing
- Automation and Software
- BioScience
- BOD
- Centrifuge
- Chemical Reactors
- Cleaning and Sterilisation
- Conductivity
- COVID-19 Safety Equipment
- Dissolved Oxygen
- Distillation, Separation, Filtration
- Environmental Soil-Water-Food Analysis
- Filtration
- Gas Generators
- General Laboratory Consumables
- Glassware
- Heating and Cooling Technology
- Calibration Bath
- Circulator - Bath
- Constant Climate Chamber
- Cooling
- Drying Ovens
- Environmental Simulation Chamber
- Fluid Connector
- Fridge Drawer
- Heating
- CO2-Incubator
- Cooling Incubator
- Heating Bath
- Heating Mantle
- Hotplate
- Incubator
- Microwave
- Oven, Furnace
- Accessoires for Muffle furnaces, M110-series
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Ashing furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Ashing furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Ashing/Burn off furnaces LV 3/11 - LVT 15/11
- Chamber furnaces
- Charging rack for ashing furnaces
- Collecting Pans for Muffle and Ashing Furnaces
- Double spatulas, nylon
- Exhaust Systems for Muffle Furnaces
- Glass Oven B-585 Drying
- High-temperature chamber furnaces with air circulation NA / NAT
- High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT 03/14 - 08/16 series
- High-temperature Tube Furnaces RHTH/RHTV series
- Muffle furnaces series L, max. 1100 °C, with flap door
- Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1
- Muffle furnaces series L, max. 1200 °C, with flap door
- Muffle furnaces series L, max. 1400 °C, with flap door
- Muffle Furnaces Series LE 1/11 - LE 24/11 up to 1100 °C
- Muffle furnaces series LT, max. 1100 °C, with lift door
- Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation
- Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control
- Muffle furnaces series LT, max. 1200 °C, with lift door
- Muffle furnaces series LT, max. 1400 °C, with lift door
- Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
- Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC-T controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
- Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC-T controller
- Muffle furnaces Thermolyne™
- Rapid incinerator
- Ribbed plates for muffle and ashing furnaces, ceramic
- Tube Furnaces
- Tube Furnaces with Stand
- Shaking Incubator
- Shaking Water Bath
- Temperature Controller, Thermostat
- Test Incubator
- Thermoblocks
- Universal Heating And Drying Incubator
- Vacuum Drying Incubator
- Water Bath
- Heating Mantle
- Highly Dynamic Temperature Control
- Incubators
- Muffle Furnace
- Shaking Water Bath
- Software/Wireless Control/Automation
- Temperature Controller
- Temperature Regulator
- Temperature Test Chamber
- Thermal Fluid
- Water Bath
- Ionselective
- Isolation Chamber
- Lab Consumables
- Lab Furnishings
- Labware
- Life Sciences
- Liquid Handling
- Microbiology
- Multi-Parameter
- Occupational Safety
- Optical Instruments and Microscopes
- ORP, Redox
- pH
- Photometry
- Powder Flow Testing
- Sample Preparation
- Spectrafuge
- Spectroscopy
- Stirring, Shaking, Mixing
- Tablet Testing
- Texture
- Titrator
- Turbidity
- Vacuum Technology
- Viscosity
- Water Purification System
- Weighing
- Life Science
- promotions
- Ultra Violet Sanitisation
Muffle furnaces series L, max. 1400 °C, with flap door
For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).
- Dual shell housing made of textured stainless steel sheets for low external temperatures and high stability
- Adjustable air inlet integrated in door
- Exhaust air outlet in rear wall of furnace
- Solid state relays provide low-noise operation
- Standard connector 230 V 1/N/PE 50/60 Hz
- 24 and 40 l with 400 V 3/N/PE 50/60 Hz
Optional:
- Chimney, chimney with fan or catalytic converter
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)
- Manual or automatic gas supply system
- Process control and documentation via VCD software package for monitoring, documentation and control
-Max. temperature 1400 °C (recommended working temperature for processes with longer dwell times is 1300 °C)
- Heating elements on support tubes for free heat radiation, short heating times and long service life
- Heating from two sides
- Flap door can be used as work platform
Alternatives
- Muffle furnaces series LT, max. 1400 °C, with lift door
Muffle furnaces series LT, max. 1200 °C, with lift door- Muffle furnaces series L, max. 1200 °C, with flap door
- Muffle furnaces series LT, max. 1100 °C, with lift door, with integrated process documentation
- Muffle furnaces series LT, max. 1100 °C, with lift door, with overtemperature limit control
- Muffle furnaces series L, max. 1100 °C, with flap door, with thermoelement Z1
- Muffle furnaces series LT, max. 1100 °C, with lift door
- Muffle furnaces series L, max. 1100 °C, with flap door
Muffle furnaces series L, max. 1400 °C, with flap door
PART NO.4AJ-4665089
82166||79566||79302||81906||79898||79666||81974||79560||79207||81152||79902||81931||81817||79104||79026||81480||82272||81657
Max. inlet pressure||Heating capacity kW||Int. width||With rim||Depth mm||For bottles||Weight kg||Throughput||Flash point||Stem Ø||Min. pressure||Package capacity pcs||Nominal capacity µl||Length needle mm||Max. interpupillary distance mm||Width stage mm||Min. voltage V||PK
L 9/14/C550||9.0||Flap door|| ||55||530 x 525 x 630 mm||3200||EU||Mains connection|| || ||250||250||170||530||525||630||1
Nabertherm
L-095K4ANO
L914C450
Muffle furnaces
Furnaces muffle
Incinerators
0
4
3
1
Out of Stock
PART NO.4AJ-4665088
82166||79566||79302||81906||79898||79666||81974||79560||79207||81152||79902||81931||81817||79104||79026||81480||82272||81657
Max. inlet pressure||Heating capacity kW||Int. width||With rim||Depth mm||For bottles||Weight kg||Throughput||Flash point||Stem Ø||Min. pressure||Package capacity pcs||Nominal capacity µl||Length needle mm||Max. interpupillary distance mm||Width stage mm||Min. voltage V||PK
L 5/14/C550||5.0||Flap door|| ||42||490 x 450 x 580 mm||2400||EU||Mains connection|| || ||200||170||130||490||450||580||1
Nabertherm
L-055K4ANO
L514C450
Muffle furnaces
Furnaces muffle
Incinerators
0
4
1
1
Out of Stock
PART NO.4AJ-4665085
82166||79566||79302||81906||79898||79666||81974||79560||79207||81152||79902||81931||81817||79104||79026||81480||82272||81657
Max. inlet pressure||Heating capacity kW||Int. width||With rim||Depth mm||For bottles||Weight kg||Throughput||Flash point||Stem Ø||Min. pressure||Package capacity pcs||Nominal capacity µl||Length needle mm||Max. interpupillary distance mm||Width stage mm||Min. voltage V||PK
L 15/14/B510||15.0||Flap door|| ||63||530 x 625 x 630 mm||3200||EU||Mains connection|| || ||250||350||170||530||625||630||1
Nabertherm
L-155K4ANL1
LT1514B410
Muffle furnaces
Furnaces muffle
Incinerators
0
4
4
1
Out of Stock
PART NO.4AJ-4665083
82166||79566||79302||81906||79898||79666||81974||79560||79207||81152||79902||81931||81817||79104||79026||81480||82272||81657
Max. inlet pressure||Heating capacity kW||Int. width||With rim||Depth mm||For bottles||Weight kg||Throughput||Flash point||Stem Ø||Min. pressure||Package capacity pcs||Nominal capacity µl||Length needle mm||Max. interpupillary distance mm||Width stage mm||Min. voltage V||PK
L 9/14/B510||9.0||Flap door|| ||55||530 x 525 x 630 mm||3200||EU||Mains connection|| || ||250||250||170||530||525||630||1
Nabertherm
L-095K4AL
LT914B410
Muffle furnaces
Furnaces muffle
Incinerators
0
4
2
1
Out of Stock
PART NO.4AJ-4665082
82166||79566||79302||81906||79898||79666||81974||79560||79207||81152||79902||81931||81817||79104||79026||81480||82272||81657
Max. inlet pressure||Heating capacity kW||Int. width||With rim||Depth mm||For bottles||Weight kg||Throughput||Flash point||Stem Ø||Min. pressure||Package capacity pcs||Nominal capacity µl||Length needle mm||Max. interpupillary distance mm||Width stage mm||Min. voltage V||PK
L 5/14/B510||5.0||Flap door|| ||42||490 x 450 x 580 mm||2400||EU||Mains connection|| || ||200||170||130||490||450||580||1
Nabertherm
L-055K4ANL
LT514B410
Muffle furnaces
Furnaces muffle
Incinerators
0
4
0
1
Out of Stock
PART NO.4AJ-4665090
82166||79566||79302||81906||79898||79666||81974||79560||79207||81152||79902||81931||81817||79104||79026||81480||82272||81657
Max. inlet pressure||Heating capacity kW||Int. width||With rim||Depth mm||For bottles||Weight kg||Throughput||Flash point||Stem Ø||Min. pressure||Package capacity pcs||Nominal capacity µl||Length needle mm||Max. interpupillary distance mm||Width stage mm||Min. voltage V||PK
L 15/14/C550||15.0||Flap door|| ||63||530 x 625 x 630 mm||3200||EU||Mains connection|| || ||250||350||170||530||625||630||1
Nabertherm
L-155K4ANO
L1514C450
Muffle furnaces
Furnaces muffle
Incinerators
0
4
5
1
Out of Stock