Home > Environmental > Water Samplers > Maxx Water Samplers > MAXX TP5 C - 16 x 1 L

MAXX TP5 C - 16 x 1 L

PART NO: M-2054016

The TP 5 C is a portable sampler in plastic housing, complete with insulating box with active cooling, vacuum dosing system and plastic metering vessel 20 - 350 ml.

It is microprocessor controled, battery-operated (12V/10Ah) and includes 5m suction hose with screw connection and sinker weight. With motor-driven distributor system and 16 x 1.0L PE bottles.

Main Features:

New, direct connection via USB of an external multiparameter portable meter pH/Cond/Temp (Option)

Clear operating structure and simple programming

LAN/WLAN/GPRS communication (Option)

Easy cleaning

Modern and ergonomic design

Transport trolley (Option)

Highly accurate sample volume

Minimal effort for calibration (Peristaltic pump)

Integrated pump replacement tube (Peristaltic pump)

Available with peristaltic pump and vacuum system

Long battery run-time thanks to "sleep mode"

2nd dosing tube for changing the sample volume (Vacuum)

Specification

Type	Portable sampler
Housing	PE / PC (GF10)
Thermostatic control	Insulated lower part (sample compartment) (insulation thickness 40mm) Option: freezer packs (200x10x8mm) Option: compressor cooling (12V/115V/230V)
Control	Microprocessor control, Sleep-Mode (<5mA), power supply 8-16 V foil keyboard (with keys 0-9, ESC, ENT, cursor), graphical display (128*64 Pixel), back lit
Data logger	3000 entries, non-volatile data memory; storage of sampling and malfunction data like sample extractions, bottle changes, messages, external signals. optional with WEB-board 100MB (2 Year ring memory-FIFO at 1 min interval)
Programming	12 freely programmable user programs, with function to link programs.
Program start options	- Immediately; - Date/Time - Weekday/Time; - By An External Signal
Program End/Stop options	End of sampling program - After 1 Run - After X Runs - Continuous Operation - Date/Time
Pause mode	Interruption of program run at any time
Overfilling protection	Adjustable from 1–999 samples/bottles
Interval setting	1 min. to 99 h 59 min. in steps of 1 minute
Pulse setting	1 to 9999 pulses/sample
Manual sample extraction	Possible at any time without interrupting the current program run
Program protection	Up to 5 years after voltage loss
Interface	Mini-USB, RS 232 optional: Ethernet RJ45, SDI-12
Communication (option)	LAN / WLAN / GPRS-UMTS optional: 1. Connection via USB and PC maxxwareConnect® has to be installed on the PC Connection to the sampler via USB/MiniUSB cable Remote control of the sampler Visualization of downloaded data Download and saving of data as PDF, CSV or XLSX Format Print-out of data directly as PDF Format Backup of all preprogramed programs from the sampler Setting and saving of programs in offline mode. Upload in online mode Read out, changing, saving or upload of all sampler programs (1-12 ) Recovery of saved programs. 2. LAN Modul RJ45 via TCP/IP and IE-Browser ARM9-SoC 32MB RAM 100 MB Data Memory (2 Year ring memory-FIFO at 1 min interval) Linus OS TCP/IP (RJ45) Recording of all CPU Data (like data of sampling cycle, bottle report, error log, temperature etc.) Visualization via Web interface Data-export (PDF, CSV, XLS) E-Mail error messaging 3. LAN Modul RJ45 + GPRS/UMTS Router ARM9-SoC 32MB RAM 100 MB Data Memory (2 Year ring memory-FIFO at 1 min interval) Linux OS TCP/IP (RJ45) Recording of all CPU Data (like data of sampling cycle, bottle report, error log, temperature etc.) Visualization via Web interface Data-export (PDF, CSV, XLS) E-Mail error messaging additionaly Fully integrated Router (industrial standard) UMTS / GPRS SIM card holder Antenna
Languages	Multi-language, selectable
Signal inputs	2 x analogue: 0/4-20 mA 8 x digital (flow, event, 1 inputs can be programmed freely) option: expandable with 4x digital, 3 inputs can be programmed freely, and 8x analogue 0- 20 mA or 0-10 V, Impulslength 60ms, switching level 7-24 V, max. working restistance 500 Ohm, max. length of signalcable 30 m
Signal outputs / status messages	8 digital outputs, 1x of them as collective malfunction message (Relay optional) option: expandable with 8 digital, 5 are freely programmable (in total 6 messages)
Sampling method	- Vacuum system 20-350 ml - Vacuum VAR (variable) system 5-250 ml Option: peristaltic pump 10-10.000 ml (flow-proportional)
Single sample volume accuracy	Vacuum system: < 2.5 % or ± 3 ml Peristaltic pump: ± 5 % or ± 5 ml
Suction height	Max. 6.5m (at 1013h Pa) optional 8.5m or 15 m (Power Booster)
Pumping speed	>0.5 m/s at suction height up to 5 m (at 1013h Pa); pump capacity can be adjusted electronically
Suction hose	PVC, L=5 m, ID=10 mm max. hose length 30 m
Sampling modes	Time-related, flow-dependent, event- related and manual sample extraction. Option: flow-proportional (for Peristaltic Pump as standard)
Bottle variants	1 x 10 L PE 1 x 25 L PE 2 x 13 L PE 4 x 5 L PE 16 x 1 L PE incl. freezer packs 24 x 1 L PE (standard version)
Overall dimensions	(Hxwxd) 787 x 510 x 468 mm /Insulating box passive 1028 x 550 x 468 mm / Insulating box active (with compressor cooling)
Weight	Approx. 25 kg 24x1 L - Isobox with passive cooling Approx. 40 kg 24x1L - Isobox with compressor cooling (device incl. battery, empty bottles but no suction hose)
Power supply	Sampler: 12 V/ 10 Ah lead storage battery (maintenance-free, leak proof); 115V or 230V operation by means of battery charger in buffer mode. Range 11-14V; power consumption max. 30 W Cooling Box: 230V 50 Hz (115V by request) or 12V battery (solar battery with at least 90 Ah)
Power requirement / number of samples	Sampler: Up to 2000 sample extractions per battery charge, according to ambient conditions. Cooling Box: Power requirement with option "active cooling" approx. ... according to ambient conditions. Aprox.. 50W. (with 90 Ah battery, 20°C ambient, sampling 3x/h = running time of cooling system aprox. 49h)
Ambient temperature	0 - 45° C
Sample temperature	0 - 40°C
Standards	CE Sampling according to ISO 5667-10, EN16479
Wetted materials	PC, PVC, Silicone, PS, PE